Fg-200 Dds Signal Generator With Frequency Counter - Versatile 0.01Hz To 500Khz Waveform Module For Sine, Square, Sawtooth & More

Fg-200 Dds Signal Generator With Frequency Counter - Versatile 0.01Hz To 500Khz Waveform Module For Sine, Square, Sawtooth & More - Usb Powered, Compact Design

(No reviews yet) Write a Review

SKU:

QV197433

Weight:

4.20 LBS

Shipping:

Calculated at Checkout

Description

Description

Material: Plastic

Power Mode: USB

Measurement Accuracy: 0.01

Operating Voltage: ≤36V

Laser Type: Without Laser

Battery Properties: Without Battery

Features: Compact size, complete functions, simple operation, easy to carry. It can be powered by a power adapter or a 3.7V lithium battery.

Together with an oscilloscope, it can be used for electronic circuit test and debugging, frequency characteristics and impulse response test and measurement of audio amplifiers. Due to the good accuracy and frequency stability of DDS, it is also very suitable for oscilloscope sweep time factor calibration

The square wave output is suitable for oscilloscope attenuator and probe pulse characteristic adjustment.

Have a filter (can be opened and closed) to suit the output of sine wave and pulse wave. This functional signal generator can test many kinds of wave forms such as: sine wave, square wave, triangle wave, forward sawtooth wave, reverse sawtooth wave, etc. It is especially designed for those professional worker.

Specifications: Material: ABS The main technical parameters: 1. Output waveforms: sine wave, square wave, triangle wave, forward sawtooth wave, reverse sawtooth wave, ECG wave, exponential rise, exponential fall, Lorentz pulse, Gauss pulse, Sinc pulse, half-wave, full-wave, Schumann wave, noise wave, and so on 15 kinds of waveforms. 2. Power supply: DC4-9V, DC5V is recommended when using adapter, 3.7V lithium battery is recommended when using battery power. 3. Current: 180MA at voltage 5V

4. Frequency range: sine wave 0.01Hz- 500.00kHz (with further increase in frequency, the output amplitude will decrease), other waveforms 0.01Hz-100.00kHz (but does not limit the upper limit of the adjustable frequency, if the distortion and jitter requirements are not high, the use of frequency can be further increased). 5. Resolution: 0.01Hz. 6. Sine wave distortion: <1% below 1kHz, <0.5% above 1kHz. 7. Output amplitude: Maximum ±10V (P-P). 8. output impedance: 50 ohms

9. DC offset: maximum ±10V, with shutdown function 10. All setup parameters can be saved 11. There are filters can be turned on and off, which can be well adapted to sinusoidal and pulse waveform output Package list: 1*Signal generator 1*USB power cable 1*BNC clip cable 1*User manual

View AllClose