WM-K120 Stretch Wrap / Pallet Wrapper / Wrapping Machine with Built-in Weight and Height Measurements and Label Printer
- 40 to 50 days lead time from the day the order is placed for fabrication and Assembly as these units are built to order EXPECT SOME DELAYS DUE TO THE COVID-19 OUTBREAK BUT REST ASSURE WE ARE PROCESSING AND SHIPPING ORDERS AS SOON AS POSSIBLE
- 1,400.00 LBS
- Free Shipping
- Bulk Pricing:
- Buy in bulk and save
ONLY $7999.99 with Free shipping
The WM-K120 Stretch Wrapping systems offer you high performance, durability, economy, and maximum versatility to meet your packaging application needs.
Kill three birds with one stone getting your pallets weighed, measured, wrapped, and labeled with the time, weight and date resulting in zero re-weigh charges from your freight companies and saving 70% to 80% on time and labor.
This stretch wrapper offers a convenient and cost-effective way to atomize your stretch wrapping application. With an easy-to-use indicator with built-in label printer. The WM-K120 also has a Pre-Stretch engine that Pre stretches your wrap, so you get the most out of each roll. A ramp is optional and recommended if you will be loading by pallet jack or if you do not have a forklift. Plug right into your 110 outlets.
Turntable/ Frame Features ·65" Diameter, 3/8" Laser-Cut Steel Plate ·5000 lbs. Load Capacity
·ANSI# 50 Chain Drive w/Adjustment-Tensioning
·Electronic Soft Start/Stop ·1-12 RPM Variable Speed
·1/2 HP, DC Controlled Drive Motor
·Low Profile ·Home Proximity Position Sensor
·No Maintenance, no need to Lube Drive System ·Sealed Double Bearing (No Lubrication needed) 12" Flywheel Drive
·8 point Heavy Duty Phenolic Lined Dual Bearing Support System
·Built-in Forklift Channels
·Tower with Tilt-Down Hinge for Easy Shipping Carriage Features
·20" Film Capacity ·1/3 HP, DC Controlled Drive Motor
·Clutch Control Film Holder
·Automatic Pallet Height Sensor with adjustable sensor position ·Film Stabilizing Roller
·Phenolic Carriage Guide ·Gear Twin Pre-Stretch Rollers, available up to 200% Pre-Stretch
·Safety Stop Switch on Carriage Control
Features ·On/Off with Power Indicator Light
·Home Position Button
·On the Fly Carriage Pause Switch
·On the Fly Variable Turntable Speed Control
·On the Fly Variable Carriage Speed Control ·Manual Carriage Up/Down Switch
·Turntable Jog Switch
·Omron PLC with Communication Port ·Motor Starter with Overload Reset and Electrical Overload Protection
·Top and Bottom Wrap Repetition Counter (0-3)
·Carriage Up and Down Switch Machine & Control Specifications ·Production Speed : 35-45 Load /Hour Based on Load Configuration
·Load Size : 53" x 53" x 82" ·Maximum Load Weight : 5,000lbs
·Power: 110V, 60Hz, 16 Amps ·Machine Weight: 800 lbs ·Height: 9’ Prime Scales Specification
·Capacity : 5000 lbs
·Accuracy: 1 lb ·Indicator Power: 110V power cord using machine power ·Display: LED Indicator with built in Label Printer Auto Zero function
Width: 30”x length 99 ½ “ x108” tall Turn table: 65”
FREE SHIPPING TO COMMERCIAL BUSINESS ADDRESS WITH A LOADING DOCK OR FORK LIFT PLEASE PROVIDE YOUR BUSINESS NAME AND ADDRESS UPON CHECK OUT.
(COLOR MAY VERY)
TRACKING YOUR ORDER
An order confirmation email will be sent to you via email as soon as your order is placed. Once your order has shipped, a shipment confirmation email with tracking information will be sent to your email.
Scale Depot warrants its products be free from defects in materials and workmanship for a period of ONE (1) year from the date of purchase. If the product proves defective during the warranty period, Scale Depot, at its option, will:
Repair the product by means of telephone support and parts covered by the warranty at no charge.
Scale Depot recommends the Customer first utilize support materials shipped with the product, product diagnostics, information contained on the Web, and email support. If unsuccessful, to obtain service under this warranty the Customer must notify Scale Depot Telephone Support or its authorized service representative of the defect before the expiration of the warranty period.
Telephone Support Number: 855-697-2253
Customers will provide appropriate assistance to Telephone Support personnel to resolve issues.
If telephone support is unsuccessful, Scale Depot or its authorized service representative will instruct the customer on how to receive warranty repair as provided below.
Service is available in the United States only.
Scale Depot reserves the right to charge for service in exception cases.
If the Customer’s product contains features that enable Scale Depot or its authorized service representative to diagnose and repair problems with the product remotely, Scale Depot may request that the Customer allow such remote access to the product.
In the maintenance of the product, Scale Depot may use new or equivalent to new parts, assemblies or products for equal or improved quality. All defective parts, assemblies, and products become the property of Scale Depot. Scale Depot may require the return of parts, assemblies and products to Scale Depot Service Center. Return and claims will be handled according to the current Scale Depot procedure.
The following parts are NOT covered by this warranty:
1.Any kind of batteries.
2.Exposed cables and wires.
3.Other wearing parts.
However, Scale Depot warrants the above parts be free from defects in materials and workmanship for a period of one week from the date of purchase.
These warranties shall not apply to any defect, failure or damage caused by improper use or improper or inadequate maintenance and care. Scale Depot shall not be obligated under these warranties:
a) to repair damage resulting from attempts by personnel other than Scale Depot representatives to install, repair or service the product unless directed by a Scale Depot representative,
b) to repair damage, malfunction, or degradation of performance resulting from improper use or connection to incompatible equipment ,
c) to repair damage, malfunction, or degradation of performance caused by the use of Non-Scale Depot supplies or consumables or the use of Scale Depot supplies not specified for use with this product,
d) to repair an item that has been modified or integrated with other products when the effect of such modification or integration increases the time or difficulty of servicing the product or degrades performance or reliability,
e) to perform user maintenance or cleaning or to repair damage, malfunction, or degradation of performance resulting from failure to perform user maintenance and cleaning as prescribed in published product materials,
f) to repair damage, malfunction, or degradation of performance resulting from use of the product in an environment not meeting the operating specifications set forth in the user manual,
g) to repair damage, malfunction, or degradation of performance resulting from failure to properly prepare and transport the product as prescribed in published product materials
Any service identified in the above list and provided by Scale Depot at the Customer’s request shall be invoiced to Customer at Scale Depot’ current rates for parts, labor and travel.
THE ABOVE WARRANTIES ARE GIVEN BY Scale Depot WITH RESPECT TO THIS PRODUCT AND ITS RELATED ITEMS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED. SCALE DEPOT AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY SIMILAR STANDARD IMPOSED BY APPLICABLE LEGISLATION. Scale Depot’ RESPONSIBILITY TO REPAIR, REPLACE, OR OFFER A REFUND FOR DEFECTIVE PRODUCTS AND RELATED ITEMS IS THE SOLE AND EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF THESE WARRANTIES.
Some states, provinces, and countries do not allow the exclusion or limitation of incidental or consequential damages or exclusions or limitations on the duration of implied warranties or conditions, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary by state.
TO THE EXTENT ALLOWED BY LOCAL LAW, EXCEPT FOR THE OBLIGATIONS SPECIFICALLY SET FORTH IN THIS WARRANTY STATEMENT, IN NO EVENT SHALL Scale Depot AND ITS VENDORS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LOSS OF PROFITS) WHETHER BASED ON CONTRACT, TORT, OR ANY OTHER LEGAL THEORY AND IRRESPECTIVE OF WHETHER Scale Depot OR THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.